Hotkey Shortcuts; Creating/Using Favorites And Shortcuts - Black Box ACR1000A-CTL-24 Manual

Ipath agility controller
Hide thumbs Also See for ACR1000A-CTL-24:
Table of Contents

Advertisement

5.2 Hotkey shortcuts

The following standard shortcuts are available for use with the Local OSD (and Remote OSD). These default hotkey combinations
can be altered within the Dashboard > Settings > Receivers page.
Left Ctrl + Left Alt + C:
Left Ctrl + Left Alt + X:
Left Ctrl + Left Alt + 3:
Left Ctrl + Left Alt + A:
Left Ctrl + Left Alt + V:
Left Ctrl + Left Alt + S:
Left Ctrl + Left Alt + E:

5.2.1 Creating/using favorites and shortcuts

When the OSD contains many possible channels and presets, it can be useful to mark the most commonly visited ones as
favorites. For those channels that you'd like to access by keyboard shortcut, there are also ten assignable hotkeys.
5.2.1.1 To create a new favorite
1 Click the
icon next to the required channel or preset.
2 Click the
button at the top of the page.
5.2.1.2 To display favorites
The star shown at the top of the channel list has three appearances to represent the three display modes. Click the star to change
the mode:
Currently showing all channels/presets.
Currently showing only favorites.
Currently showing only numbered shortcuts.
5.2.1.3 To create a new hotkey shortcut
1 Click the
icon next to the required channel or preset. The screen will list the ten hotkey slots, with any available slots listed
as EMPTY. Click the number prefix (from 1 to 0) of an available slot.
Note: To remove a previous channel from a slot, click the
2 You will now be asked to choose which mode should be used to access the channel when using this shortcut. Select View
Only, Shared or Exclusive, as appropriate.
3 Click the
button at the top of the page. As mentioned above, you will now be able to access the chosen channel
by using the hotkeys (Left Ctrl + Left Alt, as standard) plus the number that you assigned to it.
The list of channels for which you have permission will be shown, as shown in Figure 5-2 on the next page.
Launch the OSD
Disconnect the current receiver
Connect to the channel/preset saved in shortcut slot 3
Re-connect to the last channel
Change the current connection to the view-only mode
Change the current connection to the shared mode
Change the current connection to the exclusive mode
724-746-5500 | blackbox.com
icon on the right side of the slot.
Chapter 5: Operation
Page 59

Advertisement

Table of Contents
loading

Table of Contents