Black Box ACR1000A-CTL-24 Manual page 32

iPATH Agility Controller
4.4.2.6 Dashboard > Settings > Time
This page deals with all time related settings for the installation and allows up to three external NTP servers to be defined.
NTP Enabled
Determines whether one or more external Network Time Protocol servers should be used to provide timing for the installation.
Server 1 Address
Enter the IP address of the NTP server.
NTP Key Number/NTP Key
If you wish to use Symmetric key authentication for the server, enter an appropriate NTP key number and key.
If you need to add more NTP servers, click the Set option next to the NTP Server 2 or 3 entries.
Time Zone Area and Time Zone Location
Use these entries to pinpoint the current location of the installation.
4.4.2.7 Dashboard > Settings > Mail
This page sets up the email functionality of the iPATH Agility Controller if required. An external Email server is required to sit on
the network if this functionality is to be used.
Mail Enabled?
Determines whether the mail features of iPATH Agility Controller should be invoked.
SMTP Domain name/IP
Enter the name or IP address of the external SMTP server that will be used to process all outgoing mail.
SMTP Port
Enter the appropriate port on the SMTP server.
Username, Password
Enter the appropriate username and password for access to the SMTP server.
Email Address for Alerts
Enter the email address that will be used to send alert messages.
724-746-5500 | blackbox.com
Page 32