Black Box ACR1000A-CTL-24 Manual page 44

iPATH Agility Controller
Receiver Keyboard Country Code
Select the country code of the keyboard connected to the receiver.
Group Membership
To facilitate collective permission-granting for numerous receivers, a receiver can belong to one or more receiver groups. Any
permissions applied to the receiver group are inherited by all receivers that are included within the receiver group. For example,
multiple receivers can be made available to a user by placing them all in a receiver group and then granting the user permission to
use that receiver group.
Permissions
This is hidden by default as, by default, all users have access to all receivers. You can deny access to particular receivers for a user
in this section. However, be aware that users who are included within user groups may have access to the same receivers via their
groups.
USB Settings
HID only
If enabled, allows only HID (mice and keyboards) devices to be connected to the receivers.
Disable Isochronous Endpoint Alerts
When an isochronous USB device is connected to the receiver there will no longer be a warning message. Agility units do not
support isochronous devices.
Enable Isochronous Endpoint Attach
Some USB devices combine many USB devices behind a USB hub. e.g a keyboard with audio support. By enabling this option,
devices will be allowed to connect to Agility receivers, however, the isochronous part (e.g. the audio component) of the devices
will not work.
Advanced Port
This section allows you to determine USB port behaviour for use with certain USB devices.
The default is no reserved ports, Merging enabled and no feature code (or Quirk) set. It is recommended that these are left at the
default settings and are only changed under advice from a technical support engineer.
For each of the four USB ports on the receiver, certain rules can be applied depending upon the USB device connected.
If you have reserved USB ports on the transmitter, you can select which USB port to use for a particular device.
You can turn off USB merging for a particular port. This will slow down switching as the USB device will be enumerated every
time that you switch.
You can also enter an advanced feature if it is necessary for your USB device. The drop down lists the feature codes for some
known USB devices. Otherwise please contact your local technical support agent for advice.
724-746-5500 | blackbox.com
Page 44