Dashboard > Settings - Black Box ACR1000A-CTL-24 Manual

iPATH Agility Controller
4.4.2 Dashboard > Settings
Click the Settings option below the Dashboard tab.
The Settings section contains global configuration options for the iPATH Agility Controller system and is divided into eight pages,
each accessible by clicking the relevant button located below the blue options bar:
General • Transmitters • Receivers • Servers • Network • Time • Mail • Active Directory
For configuration options that affect individual receivers, users channels, etc., see the sections dealing with those tabs.
4.4.2.1 Dashboard > Settings > General
Receiver OSD Timeout
Determines the time period of inactivity within the OSD after which a standard user will be automatically logged out.
iPATH Admin Timeout
Determines the time period of inactivity within the iPATH Agility Controller config pages after which an admin user will be
automatically logged out.
Anonymous User
Determines which user is shown in the log when a receiver is set to 'No login required'.
Hide Dormant Devices
If enabled, devices that have been offline for more than 24 hours will be hidden.
Grant All Users Exclusive Access
Determines whether a user can connect to a channel exclusively and thus prevent any other users from also connecting to that
channel. If not set, users can only connect in view-only mode or shared mode. Settings that are applied specifically to a user will
override settings applied to user groups they're in, which in turn override this global setting.
Note: If a user has exclusive mode granted or NOT granted at user level, then it doesn't matter what settings there are above
(usergroups or global).
• If a user is set to inherit "allow exclusive mode" from their user groups, if any one of their user groups has "allow exclusive
mode" granted, then the user will have it granted, even if the rest of the user's usergroups have exclusive mode not granted.
• If a user is set to inherit "allow exclusive mode" from their user groups, and one of the user groups is set to inherit from the
global setting - if that global setting is "allow exclusive mode," then effectively the user group is "allow exclusive mode," so the
user will be allowed exclusive mode.
Grant All Users Remote OSD Access
If enabled, allows receivers to be switched remotely from another receiver's OSD menu.
Allowed Connection Modes
Determines the global setting that will be applied to all new channels concerning connection modes. The setting made here is
only applied as a default and can be overridden at the channel level, where necessary. Options are:
• View only: Allows users only to view/hear the video and audio output, the USB channel is denied.
• View/Shared only*: Prevents users from gaining exclusive access to a channel.
• Shared only:* Ensures that all connections are shared.
• Exclusive only: Ensures that all connections to a channel are made singularly.
• View/Shared & Exclusive*: Permits either type of connection to be made.
Page 24
724-746-5500 | blackbox.com