Black Box ACR1000A-CTL-24 Manual page 17

3.1.2 Power Supply Connection
Important: Please read and adhere to the electrical safety information given within the Safety information section of this guide. In
particular, do not use an unearthed power socket or extension cable.
1 Attach the output connector of the power supply (country specific power supplies are available) to the power input socket on
the left side of the rear panel, as shown in Figure 3-2:
2 Connect the main body of the power supply to a nearby earthed power outlet, as shown in Figure 3-3:
To switch on the iPATH Agility Controller unit, click the power switch on the front panel. Allow 3 minutes for the booting
process to complete.
Figure 3-2. Connecting the power adapter plug to the power input socket.
Figure 3-3. Connecting the power adapter plug to the power input socket.
724-746-5500 | blackbox.com
Chapter 3: Installation
Page 17