Table of Contents
Advertisement
4.4 The Dashboard Tab
The Dashboard is your main point of contact for checking and changing the general status of all iPATH Agility Controller
operations.
Click the DASHBOARD tab to view its initial home page.
The various other Dashboard pages (e.g. Settings, Backups, Updates, etc.) are selectable within the blue section located just below
the tabs.
4.4.1 Dashboard > Home
• Shutdown button - Allows the admin user to shut down the iPATH Agility Controller. The OSD will no longer work on
Receivers. The iPATH Agility Controller will need to be manually started again when next required.
• Restart - The admin user can reboot the iPATH Agility Controller. The
server is rebooting. This currently takes about 75 seconds.
Within the Home page*, the different sections provide a variety of information:
• Warning messages - Live alerts are displayed concerning any devices that are offline, rebooting, recently added or
unconfigured.
• Latest Active Connections - shows the five most recent active sessions, detailing for each: When the session started; which
user/receiver/channel is involved; the connection type (icons show audio, video, serial, USB, exclusive) and IP addresses in use.
The red unplug icon on the far right allows the admin user to disconnect a connection.
• Event Log - shows all actions performed by the admin or end-users within the iPATH Agility Controller system. See also the
Event Log
page.
• Latest Channels - shows the last five channels created within the iPATH Agility Controller system. A channel is created by
default when a new transmitter is added and configured. The edit icon next to a channel allows the admin user to configure
the channel.
• Latest User Logins - shows the last five users who logged in (either to the iPATH Agility Controller admin or at an Agility
Receiver).
• Latest User Registrations - shows the last five users added to the iPATH Agility Controller system, with a link to edit the
user's details/permissions.
• Latest Channel Changes - shows the last five users who changed a channel, either while using the on-screen display (OSD)
at an Agility Receiver, or via the iPATH Agility Controller admin control panel.
• Latest Receivers Added - shows the last five receivers to be added and configured within the iPATH Agility Controller
network. Click
to configure a receiver; click
• Latest Transmitters Added - shows the last five transmitters to be added and configured within the iPATH Agility Controller
network. Click
to configure a transmitter.
* The Home page is auto-refreshed every ten seconds to ensure that the latest information is always available.
to connect to a channel; or click
724-746-5500 | blackbox.com
Chapter 4: Configuration
OSD
and admin section will be unavailable while the
to disconnect an existing connection.
Page 23
Advertisement
Table of Contents
