Table of Contents
Advertisement
CHAPTER 7: DEVICES
7.3.1 HOTKEY
The hotkey is used with the "o" key to terminate the current connection and bring up the OSD on an InvisaPC Receiver. The hotkey
with "p" key is used to switch to the previous connection without loading the OSD.
The default hotkey is Print-Screen (PrntScrn). The alternatives are shown in the table below.
SEQUENCE
Print Screen (Default)
Ctrl + Ctrl
Alt + Alt
Shift + Shift
Mouse-Left + Right
Open OSD: "Hotkey" O
Switch to previous target: "Hotkey" P
The "Functional Hot-Key" is used to enable or disable the use of function keys after the hot-key. When the Functional Hot-key is
disabled, only the Hot-Key is required to bring up the OSD on an InvisaPC Receiver. This means only CTRL-CTRL needed to bring up
OSD if CTRL-CTRL selected as hot-key rather than CTRL-CTRL-O when Functional Hot-Key is enabled. It also means the "Hotkey" P,
switch to previous target, is no longer is enabled.
The Enable Function key is set by default.
7.3.2 RDP CONNECTION RESOLUTION
This defines the resolution to be requested from the Server when a connection is defined to be to a virtual machine. The actual
resolution that the connection actually uses will depend on the Server configuration (see Microsoft documentation).
By default the RDP Connection Resolution is set to "Auto." This means that the RDP Connection will attempt to use the preferred
resolution of the attached monitor to the InvisaPC Receiver. If the preferred resolution is not supported by InvisaPC, it will select
the next highest resolution supported by the Monitor and the InvisaPC Receiver.
7.3.3 OSD RESOLUTION
The OSD Resolution sets the resolution that will be used when the OSD is displayed on the InvisaPC Receiver. The OSD Resolution
is set to Auto by default. This means that the OSD Resolution will use the preferred resolution of the attached monitor to the
InvisaPC Receiver. If the preferred resolution is not supported by InvisaPC, it will select the next highest resolution supported by
Monitor and the InvisaPC Receiver.
The Administrator can change the OSD Resolution to set a specific resolution from the drop-down list.
TABLE 3. HOTKEY SEQUENCES
DESCRIPTION
press Prnt Scrn key
press Ctrl key twice within 1 second
press Alt key twice within 1 second
press Shift key twice within 1 second
press mouse left and right buttons at the same time for 2 seconds
1.877.877.2269
BLACKBOX.COM
NEED HELP?
LEAVE THE TECH TO US
LIVE 24/7
TECHNICAL
SUPPORT
1.877.877.2269
35
Advertisement
Table of Contents
