Table of Contents
Advertisement
Avaya 1692 IP Conference Phone
3.
Enter the Call Server IP address
NOTE: If the PBX Call Server IP address has not been configured, the phone will
reboot continuously until a valid Call Server IP address is configured. The Call Server
address may be specified using DHCP Option 242, through the 46xxsetting.txt
settings file accessed from the file server or through static configuration as shown
here.
NOTE: If the 1692 phone does not find an Avaya Communication Manager, the
phone will display "Discovering <Call Server IP address>" and will stay in this mode
until the connection issue is resolved and the phone is rebooted. The call server IP
address displayed will be either the statically or DHCP configured IP address or the
IP address of the last registered call server pulled from cache memory.
4.
Enter the Call Server Port
Note: 1719 is the default and if any other value is being used then the network
administrator needs to be contacted.
Although this can be a value between 0 and 65535, the default value is 1719. Do not
change the default value unless that value conflicts with an existing port assignment.
Contact your system administrator if this value needs to be changed from the default.
5.
Enter the Router IP address
6.
Enter the Subnet Mask IP address
7.
Enter the File Server IP address
Issue 1, September 2010
Installation, Configuration and Software Upgrade Guide
15
Advertisement
Table of Contents
