Initial Setup; Connecting Network And Power Sources; Power Over Ethernet - Avaya 1692 IP Quick Start Manual

Ip conference telephone

Hide thumbs Also See for 1692 IP:

Table of Contents

Avaya 1692 IP Conference Phone

Initial Setup

This section describes how to install your conference phone and the optional extension

microphones.

Your conference phone can obtain power from either the network through the network cable,

called Power over Ethernet (PoE), or from an AC adapter. The network cable comes with the

phone, the AC power kit must be ordered separately. Your system administrator can tell you

which of these methods best suits your teleconferencing needs

Power over Ethernet (PoE) is the default connection for your conference phone. The following

diagram shows how to connect your phone to the network using the PoE source. See Appendix

C: Power Classification for this device's PoE class.

To connect the conference phone using a PoE source:

Connect one end of a standard Ethernet Network Cable to the LAN jack on the

phone.

Connect the other end of the Ethernet Network Cable to an available LAN port on the

wall or hub/switch device port.

Issue 1, September 2010

Installation, Configuration and Software Upgrade Guide

Table of Contents