Table of Contents
Advertisement
Avaya 1692 IP Conference Phone
Upgrading
Upgrading the Binary
NOTE: Starting with R1.1, the file server type default is HTTP. This is a change from earlier
versions where the default file type is FTP. The file server must be set to the correct file server
type in order for the upgrade files to be read by the 1692.
NOTE: If downloading files from a Microsoft IIS file server you must register ".cfg" and ".ID" files
as new MIME-Types 'text/plain'.
1.
Download the upgrade file in zip or tar format from the Avaya web site.
www.avaya.com/support
2.
Clear the previous versions of code used exclusively by the 1692 conference
phones. When installing an upgrade, any existing 1692 files from a previous version
must be cleared from the file server to avoid any conflict.
3.
Unzip the1692_xxxxxx package/ zip and save it at the local file server location. Make
sure there is not a subdirectory structure within this file server directory. For example
if the file server IP address is 172.24.128.100 with its default directory as
"FTPROOT" then the application image file "1692_000110.bin" should be within the
directory "FTPROOT" and not in another folder under it.
The following is a list of the files provided for the phone:
•
•
•
•
•
•
•
•
Issue 1, September 2010
1692Localization folder containing all the supported language folders/files in it.
000000000000.cfg – Configuration File
1692_000xxx.bin – Application Image File
1692upgrade.txt – Upgrade File
Bootrom.ID – Boot ROM Image File
Phone1_vcvr.cfg – HTTPS/TLS Configuration File
Release.xml
Sip_backup.cfg – HTTPS/TLS Configuration File
Installation, Configuration and Software Upgrade Guide
19
Advertisement
Table of Contents
