Creating A Dhcp Scope For The Ip Deskphones - Avaya 1600 Series Administrator's Manual

Creating a DHCP Scope for the IP Deskphones

Use the following procedure to create a DHCP scope for the IP deskphones.
1. Select Start-->Programs-->Admin Tools-->DHCP Manager.
2. Expand Local Machine in the DHCP Servers window by double clicking it until the + sign changes
to a - sign.
3. Select Scope-->Create.
4. Using information recorded in
DHCP Server:
Define the Deskphone IP Address Range.
Set the Subnet Mask.
To exclude any IP addresses you do not want assigned to IP deskphones within the Start and
End addresses range:
a. In the Exclusion Range Start Address field, enter the first IP Address in the range that you
want to exclude.
b. In the Exclusion Range End Address field, enter the last IP Address in the range that you
want to exclude.
c. Click the Add button.
d. Repeat steps a. through c. for each IP address range to be excluded.
Note:
Avaya recommends that you provision the 1600 Series IP Deskphones with sequential
Note:
IP addresses. Also do not mix 1600 Series IP Deskphones and PCs in the same scope.
5. Under Lease Duration, select the Limited To option and set the lease duration to the maximum.
6. Enter a sensible name for the Name field, such as "DEFINITY IP Deskphones."
7. Click OK.
A dialog box prompts you: Activate the new scope now?
8. Click No.
Note:
Activate the scope only after setting all options.
Note:
Table 3: Required Network Information Before Installation - Per
DHCP Server Administration
Issue 6 August 2014 43