E+E Elektronik EE310 Operating Manual page 16

ON
Power
OFF
Switching point
Hysteresis
open
Terminal 2-3
closed
open
Terminal 5-6
closed
Fig. 17 Example of alarm in case of power supply failure using inverted alarm outputs.
The measurands at the outputs as well as switching points, hysteresis and the default state
(standard / inverted) can be set via EE-PCS Product Configuration Software or using the display
and the push buttons.
Menu
Alarm output*
Alarm number
Mode
* Menu only available with connected alarm module during EE310 start-up
16
% / RH
Alarm 1
Alarm 2
Switch hysteresis
Switch window
Error indication
t
Standard
Inverted
Measurand
Switching point
Switching point
Hysteresis
Standard
Normal state
Inverted
Measurand
Switching point
Switching point
low
Hysteresis
Switching point
Switching point
high
Hysteresis
Standard
Normal state
Inverted
Standard
Normal state
Inverted
Operating instructions for EE310 Humidity / Temperature Transmitter
OFF
Temperature [°C]
Temperature [°F]
Temperature [K]
Rel. humidity [%]
Vap. p. pressure [mbar]
Vap. p. pressure [psi]
Dew point [°C]
Dew point [°F]
Wet bulb temp. [°C]
Wet bulb temp. [°F]
Abs. humidity [g/m³]
Abs. humidity [gr/ft³]
Mixing ratio [g/kg]
Mixing ratio [gr/lb]
Enthalpy [kJ/kg]
Enthalpy [ft lbf/lb]
Enthalpy [BTU/lb]
Frost point [°C]
Frost point [°F]
Water activity [aw]
Saturation [%]
Water content [ppm]
Wet bulb temp. [K]
Dew point [K]
Frost point [K]
Volume concentr. [ppm]