Main Function - ACME E-40D TC DXX User Manual

How To Change The Gobo
At first, put the gobo by hand as the arrow into the gobo gel splint,
and insert the gobo gel splint into the slot of the unit, please turn
the hand knob to left or right in order to take out gobo gel splint.

Main Function

To select any of the given functions, press the MENU button up to
when the required one is showing on the display. Select the function
by ENTER button and the display will blink. Use the DOWN/UP
button to change the mode. Once the required mode has been
selected, press the ENTER button to setup, to go back to the
functions without any change press the MENU button again. Hold
and press the MENU button about one second or wait for one
minute to exit the menu mode.
The main functions are showing below:
2B