ACME E-40D TC DXX User Manual page 8

(blue), ,Once the mode has been selected, press the ENTER button
to setup the value from 125 to 255, to go back to the functions
without any change press the MENU button again. Hold and press
the MENU button about one second or wait for one minute to exit
the menu mode.
Manual Mode
Press the MENU button up to when the
display. Pressing ENTER button and the display will blink. Use DOWN
and UP button to select
(dimmer),
press the ENTER button to setup the value from 0 to 255, to go back
to the functions without any change press the MENU button again.
Hold and press the MENU button about one second or wait for one
minute to exit the menu mode.
Auto Test
Press the MENU button up to when the
display. Press the ENTER button and the unit will run the built-in
programmer for self-test. To go back to the functions press the
MENU button.
Fixture Hours
(red),
(strobe),Once the mode has been selected,
7B
is shown on the
(green),
is blinking on the
(blue),