ACME E-40D TC DXX User Manual page 7

Light intensity control is finger at low levels and high levels and
coarser at medium levels.
LED
Press the MENU button up to when the
display. Pressing ENTER button and the display will blink. Use DOWN
and UP button to select
mode has been selected, press the ENTER button to setup, to go
back to the functions without any change press the MENU button
again. Hold and press the MENU button about one second or wait
for one minute to exit the menu mode.
Display Inversion
Press MENU button until
DOWN and UP button to select
Once the mode has been selected, press the ENTER button to setup,
to go back to the functions without any change press the MENU
button again. Hold and press the MENU button about one second or
wait for one minute to exit the menu mode.
White Balance
Press the MENU button up to when the
display. Pressing ENTER button and the display will blink. Use DOWN
and UP button to select
(On) or
is blinking on the display. Use the
(normal) or
(red),
6B
is shown on the
(Off), Once the
(inverse),
is shown on the
(green),