ACME E-40D TC DXX User Manual page 5

has been selected, press the ENTER button to setup, to go back to
the functions without any change press the MENU button again.
Hold and press the MENU button about one second or wait for one
minute to exit the menu mode.
Channel Mode
Press the MENU button to show
ENTER button and the display will blink. Use the DOWN and UP
button to select the 1ch, 2ch, 3ch or 8ch. Once the mode has been
selected, press the ENTER button to setup, to go back to the
functions without any change press the MENU button again. Hold
and press the MENU button about one second or wait for one
minute to exit the menu mode.
DMX State
Press the MENU button up to when the
display. Pressing ENTER button, Use DOWN and UP button to select
the (blackout mode) or
has been selected, press the ENTER button to setup, to go back to
the functions without any change press the MENU button again.
Hold and press the MENU button about one second or wait for one
minute to exit the menu mode.
on the display. Press the
(last state). Once the mode
4B
is shown on the