Setting Up The Bioanalyzer; Vortex Mixer - Agilent Technologies DNA 7500 Manual Kit

Setting up the Bioanalyzer

1 Open the lid of the bioanalyzer and make sure that the electrode cartridge is
2 Remove any remaining chip.

Vortex Mixer

IKA - Model MS3
1 To set up the vortex mixer, adjust the
inserted in the instrument. If not, open the latch and insert the electrode
cartridge.
Figure 1 Electrode cartridge inserted in the instrument (graphic shows an
example).
speed knob to 2400 rpm.
Setting up the Assay Equipment and Bioanalyzer
Setting up the Bioanalyzer
3
9