Setting Up Email Alerts And Protocol Alerts; Set Up The Email Settings For Outgoing Email Alerts - Agilent Technologies Magnis G9710A User Manual

Setting Up Email Alerts and Protocol Alerts

Set up the email settings for outgoing email alerts

The system can send automatic email alerts to individual user accounts, as determined by the
user account settings (see
the sender information for emails sent by the system.
1 From the Home screen, press Settings.
The
2 Press Connectivity Settings.
The
3 Press Email Alert Settings.
The
4 Press Mail Server Info to expand the settings for the email server. Enter the requested
information into the fields shown on the screen.
Figure 16 Mail Server Info expanded
•
•
•
If you do not know the outgoing mail server and/or port, or do not know if the server supports
SSL encryption, ask your network administrator. For public email servers, you can often look up
the SMTP address using an internet search.
5 Press Mail Server Info again to collapse the email server settings. Do not press Apply at this
time.
6 Press Sender Info to expand the settings for the outgoing email account. Enter the requested
information into the fields shown on the screen.
Magnis and MagnisDx NGS Prep System User Guide
"Edit user accounts"
Settings screen opens.
Connectivity Settings screen
Email Alert Settings screen
Outgoing Mail Server (SMTP): Enter the host name of the SMTP (Simple Mail Transfer
Protocol)
Port: Enter the port number for SMTP
Use Secure Sockets Layer (SSL): Mark the check box if the outgoing mail server supports
SSL encryption
on page 25). To use these alerts, you must set up
opens.
opens.
33