Installing The Processor Into A Processor And Heat Sink Module - Dell X95FF Installation And Service Manual

Figure 49. Removing the processor carrier
Next steps
Replace the processor into a processor and heat sink module

Installing the processor into a processor and heat sink module

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
Steps
1. Place the processor in the processor tray.
NOTE: Ensure that the pin 1 indicator on the processor tray is aligned with the pin 1 indicator on the processor.
2. Place the processor carrier on top of the processor that is in the processor tray aligning pin 1 indicator on the processor.
NOTE: Ensure that the pin 1 indicator on the carrier is aligned with the pin 1 indicator on the processor before placing
the carrier on the processor.
NOTE: Ensure that the processor and the carrier are placed in the tray before you install the heat sink.
Safety instructions.
Before working inside your
(PHM).
system.
Installing and removing system components 57