Pin Assignment For Industrial Ethernet Interface - Siemens SIMATIC RF600 System Manual

Readers
5.3 RF670R reader
Note
Please note that the pin assignment for the power connection differs between the RF670R
and the RF660R!
5.3.1.7

Pin assignment for Industrial Ethernet interface

Industrial Ethernet (on reader side)
NOTICE
We recommend that only original Siemens Ethernet crossover cables are used (10 m cable:
Order No. 6GT2891-1HN10) or the Siemens connector (see Section Ordering data
(Page 115)) for connecting to the Ethernet socket of the reader. If plug-in connectors from
other manufacturers are used, it may be difficult or even impossible to remove the plug from
the reader
124
Pin Pin assignment
1 Transmit Data (+)
2 Transmit Data (-)
3 Receive Data (+)
4 Terminated
5 Terminated
6 Receive Data (-)
7 Terminated
8 Terminated
System Manual, 06/2010, J31069-D0171-U001-A10-7618
Draft Version 02.06.2010
SIMATIC RF600