Simatic Rf600 - Siemens SIMATIC RF600 System Manual

Readers
5.2 RF630R reader
Power supply
20 V input voltage on the reader, typical
24 V input voltage on the reader, typical
30 V input voltage on the reader, typical
Rampup time
All supply and signal voltages must be safety extra low voltage (SELV/PELV according to EN 60950)
1)
24 V DC power supply: safe (electrical) isolation of extra-low voltage (SELV / PELV acc. to EN 60950)
Mechanical environmental conditions
Shock resistant to EN 60068-2-27
Vibration EN 60068-2-6
Climatic Conditions
Ambient temperature in operation
Ambient temperature for transport and storage
The values for shock and vibration are maximum values and must not be applied continuously.
1)
EMC & approvals/conformity for ETSI variant
Electromagnetic compatibility
Approvals/Conformity
EMC & approvals for FCC variant
Electromagnetic compatibility
Approvals
108
Current consumption
(at 500 mW ERP)
470 mA
395 mA
320 mA
7 s
50 g
1
20 g
1
-25 °C to +55 °C
(a 10-minute warm-up time must be observed at an operating
temperature below -20 °C)
-40 °C to +85 °C
ETSI EN 301 489-1 / -3
ETSI EN 302 208
● Radio to R&TTE guidelines EN 300 330, EN 301 489
● CE
● ETSI EN 302-208 V1.1.1
● ETSI EN 302-208 V1.2.1
● Reader degree of protection acc. to EN 60529 (IP65)
FCC Part 15
● FCC, cULus
● IEC60950, including US and Canadian variants of it
● FCC CFR47 Part 15.247
● RoHS-compliant according to EU Directive 2002/95/EC
● Industrial Canada, RSS-210, Issue 7, June 2007
System Manual, 06/2010, J31069-D0171-U001-A10-7618
Draft Version 02.06.2010
Power requirement
(at 500 mW ERP)
9.4 W
9.48 W
9.6 W

SIMATIC RF600