Overview Of Parameterization Of Rf600 Reader; Application Example - Siemens SIMATIC RF600 System Manual

Antennas
6.4 Guidelines for selecting RFID UHF antennas
6.4.6

Overview of parameterization of RF600 reader

The parameterization possibilities that are available to you for each reader of the RF600 family
are outlined below. You will find detailed information on parameterization in the specified
chapters of the documentation:
Readers RF-
MANAGER 2008
SP 3
RF670R Online-Help >
chapter
"Introduction to RF-
MANAGER >
Overview of the
RFID functions"
RF660R
RF630R
RF620R
RF610M
6.4.7

Application example

This section contains an example with specific values. Using this example it is possible to
understand how the complete selection procedure for antennas, cables, and adapters as well
as the settings could be carried out on an RF600 system reader.
In the example it is assumed that you wish to use your SIMATIC RF600 system with your third-
party components in Germany (ETSI EN 302 208 V1.2.1).
198
SIMATIC RF-MANAGER
command Basic 2010
messages
Online help >
chapter
"Working with
RFID objects"
"Configuration
Manual RF620R/
RF630R", chapter
"Overview of
commands"
"Configuration
Manual RF620R/
RF630R", chapter
"Overview of
commands"
Draft Version 02.06.2010
Configuration XML commands RFID reader
software
Function
Manual
RF670R,
Chapter
"Standard
Configuration
Messages"
"Configuration Function
Manual Manual
SIMATIC RF660R,
RF660R Chapter
Configuration "Standard
software", Configuration
chapter Messages"
"Parameterizin
g the RF660R"
System Manual, 06/2010, J31069-D0171-U001-A10-7618
interface
Function
Manual Mobile
Reader,
chapter"RFID
Reader
Interface
Reference"
SIMATIC RF600