Environmental Conditions; General Procedure - Siemens SIMATIC RF600 System Manual

Figure 6-17
When operating the RF600 system, additional influencing factors must also be observed such
as minimum spacing between antennas in the room. You will find this information in the System
Manual "SIMATIC RF600".
6.4.3.2

Environmental conditions

CAUTION
Damage to the device
In line with the application, you must take into consideration the mechanical loads (shock
and vibration) as well as environmental demands such as temperature, moisture, UV
radiation.
The device could be damaged if these factors are not considered.
6.4.3.3

General procedure

Depending on whether you wish to use a third-party antenna or antenna cable - or both - in
combination with the SIMATIC RF660R reader, these instructions will help you to select the
components and to set the important parameters in the SIMATIC RF660R configuration
software.
There are two different application cases:
SIMATIC RF600
System Manual, 06/2010, J31069-D0171-U001-A10-7618
Overview of total system and influencing factors
Draft Version 02.06.2010
6.4 Guidelines for selecting RFID UHF antennas
Antennas
183