Scenario For Workpiece Identification - Siemens SIMATIC RF600 System Manual
Hide thumbs
Also See for SIMATIC RF600:
- System manual (506 pages) ,
- Configuration manual (294 pages) ,
- Compact operating instructions (3 pages)
Table of Contents
Advertisement
Feature
Single-tag
Multi-tag
Read velocity
Orientation of the RFID tag
Carrier material of the tag
Reading range
Reader density
Interference
4.2.3
Scenario for workpiece identification
A typical characteristic of modern manufacturing scenarios is their multitude of variations. The
individual data and production steps are stored in the tag of a toolholder or product. These
data are read by the machining stations during a production process and, if necessary, tagged
with status information. This can be used to dynamically identify which production step is the
next in the series. This has the advantage that the production line can work automatically
without the need to access higher system components. The use of RFID therefore increases
the availability of the plant.
SIMATIC RF600
System Manual, 06/2010, J31069-D0171-U001-A10-7618
Draft Version 02.06.2010
RF600 system planning
4.2 Possible system configurations
Yes
No
Max. 2 m/s
Not defined
Metal or non-metal
Approx. 1 m
High
High
33
Advertisement
Table of Contents
