200 Engine Box Cover/Lifting/Removal
The engine box cover is designed as a two-piece clam shell part. Lift
up slightly on the latch located in the front of the box and open fully
until it rests onto the stern seat. Access to the routine service items
is now available. You can leave the top open to dry out the bilge.
To remove the entire box, locate the three folding hold-down
brackets mounted to the inside bottom half of the motor box. Turn
the wing nuts counterclockwise until the threaded pin can be folded
out of the bracket. The engine box can now be lifted out of the boat.
The engine box is designed to cover the engine adequately while
providing maximum cockpit floor space. After releasing the interior
hold down brackets, employ the help of a second person to safely
maneuver the box up over the engine and out of the boat.
Controls and Indicators
NOTICE
LATCH
CORC0274
CORC0328
4-55