5.6 Settings
(1) Checking and Setting the Date and Time
1)
Purpose
The date and time is set to Japan standard time at factory shipment.
Reset the date and time to your local value as necessary.
2)
Procedure
2-1) When CXDI application start, open the ADMINISTRATOR SETUP MENU.
SYSTEM → SETUP MENU → ADMINISTRATOR SETUP
2-2) When the "ADMINISTRATOR SETUP MENU" appears, and presses the [DATE]
button.
2-3) The dialog (Date / Time Properties) appears, and set the value properly each of the
fields which the tab sheet (Date&Time and Time Zone sheet) has. And then press
[OK].
2. Installation Manual
- 29 -