Canon CXDI-50G Service Manual page 157

Error Code Reply
Seriousness Keys
-100 OK
Fatal
-102 -14
Fatal
-15
-95
-98
-103 Shut Down
Fatal
-105 OK
Fatal
-97
Error Code List for Version 6.00
[Operation after Reply Key is touched]
#1:Fatal Error
#2:Sensor Unit: SelfCheck Error
#3:Detected an Error.
#4:ER(n) (xxxx)
xxxx: Error code
[Cause]
An undefined error has been found in the sensor A/D board.
[Operation after Reply Key is touched]
Nothing
Error in starting the task in DLL (Failed to begin thread.)
Error in DLL resource (Driver does not start.)
Number of sensor units is incorrect (No sensor unit is
connected.)
Capture device cannot be found.
#1:Fatal Error
#2:READ Timeout Error
#3:Failed to transmit the data.
[Cause]
Image transferring from Ethernet has failed.
[Operation after Reply Key is touched]
For "Reply" cannot be done, the system must be shutdown.
#1:Fatal Error
#2:CXDCAP.INI Open Error
#3:Install CXDCAP.INI file.
[Cause]
The cxdcap.ini file has not been installed.
[Operation after Reply Key is touched]
The system enters a fatal condition. All the sensor units will
therefore be disconnected. A service person needs to be called
in. However, you can transfer the image and use the study list.
No cxdcap.ini file is found.
- 2 -
ror Code List for Versi
Message
[Cause]