Table of Contents
Advertisement
3-2) Checking the firmware and PLD code
(1) Connect the keyboard and mouse.
(2) Start up the CXDI system.
(3) Close the CXDI host software if it starts up.
(4) Connect Telnet by referring to "CXDI-50G Telnet Connection" in the Tool Software
Operation Manual for CXDI-50G.
(5) Check the versions of the firmware and PLD code on the screen displayed after the
login.
login: canon
Password: ********
CXDI-50G firmware Ver.1.01.00
build as Jul 2 2003 16:13:45
normal boot
HUB50 Ver.5010 product code:0701
pcb-50di>
(6) After you finish checking, close HyperTerminal.
2. Installation Manual
- 31 -
Firmware version
Hardware version
PLD code version
Hide quick links:
Advertisement
Table of Contents
