Setup The Console; User Options; Console Manage - Code MINI 1000 User Manual

8. Setup the Console

Press Setup, users can entry the "SETUP MENU".

8.1. User options

8.1.1. Console Manage

You can setup the run mode by pressing [Console Manage]:
Playback GO+/GO- --- The option defaults in [Enable]. When Cue-lists link mode is
set as manual or 'Link=Off', the key under playback fader can be used as GOTO function (Go+
or Go- depends on the direction setting of cue-lists).
If the option is in [Disable], if the playback fader is not fully output, the keys under the
faders can be used as intensity flash output.
Quick Palette --- The option defaults in [Enable]. Users can recall presets even though
without select fixtures.
If the option is in [Disable], you have to select the fixtures before recalling presets. If
you do not select any, the presets can not be recalled.
Skip Macro Show start time --- The option defaults in [Disable]. It is used for macro
show which recorded with internal clock. When the option is in [Enable], the beginning time
slot will be canceled.
Keep the brightness --- The option defaults in [Disable]. The group of fixtures will be
switched light up one by one from function of 'Seriatim light up fixtures'. If the option is in
[Enable], the fixtures will keep on after lighted up.
After finished you may use Find key to select all fixtures again.
MINI_1000_en.pdf
48
http://www.codelight.com