Set Effect Of Fader; Lock Faders; Rename The Playback; Run Playback - Code MINI 1000 User Manual

6.7.5. Set effect of fader

If there is a Cue saved with shape effects, users can set the fader trigger with 4 modes by
option [Effect By Fader] as "Size By Fader", "Speed By Fader" or "Size+Speed By Fader".

6.7.6. Lock faders

Users can lock the playback by option [Lock Page For Fader]. Once select the option,
the playback will be locked in the page where locates in. You can run the same program by the
same fader even though in other pages.
Note: Once the playback was locked. Playbacks in the same fader in other pages
will be unavailable.

6.7.7. Rename the Playback

Select a playback in the list can rename the playback by option [Playback Legend].
The name of the playback will be displayed on the bottom right corner when fade in the
playback.

6.8. Run Playback

It's easy to run a Playback. Select the Playback page, and fade in the Playback. When
running several playbacks, on the bottom right corner of touch screen will display the latest
playback which had been faded in. You can switch the running playback to present state by
press Shift along with the key upon playback fader. The velocity of Cue-lists at present state
can be adjusted by Wheel D.
The keys upon or under playback faders have different functions for running
playbacks.
1> Keys upon playback faders can be used as pre-locate or pause.
The key can be used as Pre-locate function before the playback is faded in. Press the key
upon the fader. All LTP channels of fixtures will be set to the value on first scene of playback
with lamp off. Once you fade in the playback, the program will start to run immediately.
You may also hold the key upon the fader and fade in the playback. The program will start
to run with lamp off. Once you release the key, the fixtures will lamp on immediately.
If you had faded in a playback, the key upon is used for pause function. The fixtures will
stop at the present position when you press pause.
2> Keys under playback faders can be used as flash or manual control.
T The key under playback fader can be used as flash if the playback is not faded in. Press
and hold the key can keep running the playback as the same as faded in the playback fully.
Once the key is released, the playback will stop running.
If there is a cue-lists playback had faded in, the key can be used as manual control. Press
the key once means to run one step of the cue-lists.
Note: In order to use manual control function, the setting of "Playback GO+/GO-"
in "Console Manage" should be in [Enable], and the cue-lists steps should be set as
Inside with Link Off or Manual.
MINI_1000_en.pdf
37
http://www.codelight.com