Modifying User Privileges - GE D90 Plus Instruction Manual

ENERVISTA SECURITY MANAGEMENT SYSTEM

Modifying user privileges

580
• The user adding the new user must have administrator rights.
• The EnerVista security management system must be enabled.
1. Select the Security > User Management menu item to open the user management
configuration window.
2. Enter a username in the User field. The username must be between 4 and 20
characters in length.
3. Select the user access rights by checking one or more of the fields shown.
Field Description
Delete Entry Checking this box will delete the user when exiting the user management
configuration window.
Actual Values Checking this box allows the user to read actual values.
Settings Checking this box allows the user to read setting values.
Commands Checking this box allows the user to execute commands.
Event Recorder Checking this box allows the user to use the digital fault recorder.
Protection FlexLogic Checking this box allows the user to read protection FlexLogic™ values.
Automation Logic Checking this box allows the user to read automation logic values.
Update Info Checking this box allows the user to write to any function to which they have
read privileges. When any of the Settings, Event Recorder, Protection
FlexLogic, and Automation Logic boxes are checked by themselves, the user
is granted read access. When any of these are checked in conjunction with
the Update Info box, they are granted read and write access. The user will
not be granted write access to functions that are not checked, even if the
Update Info field is checked.
Admin When this box is checked, the user will become an EnerVista UR
Setup administrator, therefore receiving all of the administrative rights.
Exercise caution when granting administrator rights.
4. Click OK to add the new user to the security management system.
The following procedure describes how to modify user privileges in the security
management system. The following pre-requisites are required to add new users.
• The user modifying the privileges must have administrator rights.
PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 13: SECURITY
Plus