SHARED OPERANDS
Shared communication operands
Customizing the communication logic operands
166
For example, assume that the
within the automation function. This operand would then be assigned as a shared
operand, and would subsequently become available to the automation function. A total of
64 operands may be assigned as shared operands within each function.
Select the Settings > Protection > Protection Inputs/Outputs > Shared Operands menu
item to select the shared communication operands.
Figure 150: Shared operands configuration window
The left side of this screen displays all D90
function as shared operands. Select any operands from the other six primary features by
clicking on the >> button. Operands may be de-assigned as shared operands by pressing
the << button.
Select the Settings > Configure FlexOperands menu item to open the user-configurable
operands window.
protection operand is required as a signal
GND TOC1 OP
Plus
operands that are available to the protection
PLUS
D90
LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 6: COMMUNICATIONS