Modifying User Privileges - GE T35 UR Series Instruction Manual

8.1 USER ACCOUNTS
3. Select the user access rights by enabling the check box of one or more of the fields.
The table outlines access rights.
Table 8–1: ACCESS RIGHTS SUMMARY
FIELD
Delete Entry
Actual Values
Settings
Commands
Event Recorder
FlexLogic
Update Info
Admin
4. Click OK to add the user account to the security management system.
The following pre-requisites are required to modify user privileges in the EnerVista security management system:
8
• The user modifying the privileges must have administrator rights
• The EnerVista security management system must be enabled
To modify user privileges:
1. Select the Security > User Management menu item to open the user management window.
2. Locate the username in the User field.
8-2
DESCRIPTION
Deletes the user account when exiting the user management window
Allows the user to read actual values
Allows the user to read setting values
Allows the user to execute commands
Allows the user to use the digital fault recorder
Allows the user to read FlexLogic values
Allows the user to write to any function to which they have read privileges. When any of the Settings, Event
Recorder, and FlexLogic check boxes are enabled by themselves, the user is granted read access. When
any of them are enabled in conjunction with the Update Info box, they are granted read and write access.
The user is not granted write access to functions that are not checked, even if the Update Info field is
checked.
The user is an EnerVista UR Setup administrator, therefore receiving all of the administrative rights.
Exercise caution when granting administrator rights.
T35 Transformer Protection System
8 SECURITY

8.1.4 MODIFYING USER PRIVILEGES

GE Multilin