Setting Group Control - GE D90 Plus Instruction Manual

CONTROL ELEMENTS

Setting group control

308
Figure 261: Directional comparison unblocking scheme logic, sheet 2 of 2
The setting groups control function activates and deactivates of up to six setting groups.
Select the Settings > Protection > Control > Setting Group Control menu item to access
the setting group control settings.
Figure 262: Setting group control configuration
The following settings are available for setting groups control.
Function
Range: Enabled, Disabled
Default: Disabled
This setting is used to enable and disable the setting groups control functionality.
PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 7: PROTECTION