Software Requirements; Installing The Enervista Ur Plus Setup Software - GE D90 Plus Instruction Manual

ENERVISTA SOFTWARE

Software requirements

Installing the EnerVista UR
8
Plus
The EnerVista UR Setup software interface is used to communicate with the D90
This software interface is the preferred method to edit settings and view actual values
because the PC monitor can display more information in a simple comprehensible format.
The following minimum requirements must be met for the EnerVista UR
to properly operate on a PC.
• Pentium class or higher processor (Pentium II 300 MHz or higher recommended).
• Windows 2000, XP, or Vista.
• Internet Explorer 4.0 or higher.
• 128 MB of RAM (256 MB recommended).
• 200 MB of available space on system drive and 200 MB of available space on
installation drive.
• Video capable of displaying 800 × 600 or higher in high-color mode (16-bit color).
• USB 2.0 or Ethernet port for communications to the IED.
After ensuring the minimum requirements for using EnerVista UR
previous section), use the following procedure to install the EnerVista UR
enclosed GE EnerVista CD.
1. Insert the GE EnerVista CD into your CD-ROM drive.
2. Click the Install Now button and follow the installation instructions to install the no-
charge EnerVista software.
3. When installation is complete, start the EnerVista Launchpad application.
4. Click the IED Setup section of the Launch Pad window.
5. In the EnerVista Launch Pad window, click the Add Product button and select the
Plus
"D90 Line Distance Protection System" from the Install Software window as shown
below. Select the "Web" option to ensure the most recent software release, or select
"CD" if you do not have a web connection, then click the Add Now button to list
software items for the D90
Plus
Setup software
Plus
.
PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – INSTRUCTION MANUAL
CHAPTER 1: GETTING STARTED
Plus
.
Plus
Setup software
Plus
Setup software (see
Plus
Setup from the