5.1 SIMATIC RF310R
Pin assignment RF310R with RS-422 interface
LED operating display
The operational statuses of the reader are displayed by the LEDs. The LED can adopt the
colors green, red or yellow and the statuses off
Table 5- 2
Only in the "with presence" mode.
Ensuring reliable data exchange
The "center point" of the transponder must be situated within the transmission window.
+ 24 V
LED operating display on the reader
Operating voltage present, reader not initialized or antenna switched off
Operating voltage present, reader initialized and antenna switched on
Error has occurred, the type of flashing corresponds to the error code in the
table in the section Error codes. The optical error display is only reset if the
corresponding reset parameter ("option_1", see FC 45 / FB 45 documentation,
section Input parameters) is set.
System Manual, 07/2016, C79000-G8976-C345-0x