Dimension Drawing - Siemens SIMATIC Ident System Manual

Readers
5.5 SIMATIC RF340R/RF350R - second generation
UL information (IEC61010-1 / IEC61010-2-201)
This standard applies to equipment designed to be safe at least under the following
conditions:
● a) indoor use;
● b) altitude up to 2 000 m;
● c) temperature -25 °C to 70 °C;
● d) maximum relative humidity 80 % for temperature up to 31 °C decreasing linearly to 50
% relative humidity at 40 °C;
● e) TRANSIENT OVERVALTAGES up to the levels of OVERVALTAGE CATEGORY II,
NOTE 1: These levels of transient overvoltage are typical for equipment supplied from the
building wiring.
● f) using a "NEC Class 2" power supply is required
5.5.2.9

Dimension drawing

Figure 5-22
Dimensions in mm
164
RF350R dimension drawing
System Manual, 07/2016, C79000-G8976-C345-0x
SIMATIC RF300