Siemens SIMATIC Ident System Manual page 172

Readers
5.6 SIMATIC RF380R
5.6.10 Use of the reader in hazardous areas
The TÜV SÜD Automotive GmbH as approved test center as well as the TÜV SÜD Product
Service GmbH as certification center, identification number 0123, as per Article 9 of the
Directive of the European Council of 23 March 1994 (94/9/EC), has confirmed the
compliance with the essential health and safety requirements relating to the design and
construction of equipment and protective systems intended for use in hazardous areas as
per Annex II of the Directive. The essential health and safety requirements are satisfied in
accordance with the following standards:
Document
EN 60079-0: 2006
EN 60079-15: 2005
DIN VDE 0848-5: 2001
(in parts)
ZLS SK 107.1
Identification
The identification of the electrical equipment as an enclosed unit is:
-25 °C to +70 °C
Um=30Vdc
The equipment is assigned the following references:
XXXYYYZZZ
TPS 09 ATEX 1 459 X [= certificate number]
"No use of the equipment in the vicinity of processes generating high charges"
"Do not disconnect plug on load"
172
Title
Electrical equipment for hazardous gas atmospheres -
Part 0: General requirements
Electrical equipment for hazardous gas atmospheres -
Part 15: Design, testing and identification of electrical equipment
with type of protection "n"
Safety in electrical, magnetic and electromagnetic fields -
Part 5: Explosion protection
Central office of the states for safety; test components
II 3G Ex nC IIB T5
[= serial number, is assigned during production]
System Manual, 07/2016, C79000-G8976-C345-0x
SIMATIC RF300