Download  Print this page

Operation In Static And Dynamic Mode - Siemens SIMATIC Ident System Manual

Identification rfid systems.
Hide thumbs

Advertisement

4.1.7

Operation in static and dynamic mode

Operation in static mode
If working in static mode, the transponder can be operated up to the limit distance (S
transponder must then be positioned exactly over the reader:
Figure 4-7
Operation in dynamic mode
When working in dynamic mode, the transponder moves past the reader. The transponder
can be used as soon as the intersection (SP) of the transponder enters the circle of the
transmission window. In dynamic mode, the operating distance (S
[Operating distances, see Chapter Field data for transponders, readers and antennas
(Page 48)]
Figure 4-8
SIMATIC RF300
System Manual, 07/2016, C79000-G8976-C345-0x
Operation in static mode
Operation in dynamic mode
Planning the RF300 system
4.1 Fundamentals of application planning
) is of primary importance.
a
). The
g
45

Advertisement

   Also See for Siemens SIMATIC Ident

   Related Manuals for Siemens SIMATIC Ident

This manual also for:

Simatic rf300

Comments to this Manuals

Symbols: 0
Latest comments: