Download  Print this page

Siemens SIMATIC Ident System Manual Page 42

Identification rfid systems.
Hide thumbs


Planning the RF300 system
4.1 Fundamentals of application planning
Secondary fields without shielding
The following graphic shows typical primary and secondary fields, if no shielding measures
are taken.
Figure 4-4
In this arrangement, the reader can also read tags via the secondary field. Shielding is
required in order to prevent unwanted reading via the secondary field, as shown and
described in the following.
Main field
Secondary field
Secondary field without shielding
System Manual, 07/2016, C79000-G8976-C345-0x


   Also See for Siemens SIMATIC Ident

   Related Manuals for Siemens SIMATIC Ident

This manual also for:

Simatic rf300

Comments to this Manuals

Symbols: 0
Latest comments: