Interfaces; Interface Overview; Table 3-1 Overview Of Available External Interfaces; Table 3-2 Overview Of Interfaces That Cannot Be Used For Simotion D - Siemens SIMOTION D45 Series Manual

Interfaces

3.1

Interface overview

This section describes the interfaces of the SIMOTION D4x5.
Available interfaces
Table 3-1
Interface
DRIVE-CLiQ interface (0)
DRIVE-CLiQ interface (1)
DRIVE-CLiQ interface (2)
DRIVE-CLiQ interface (3)
DRIVE-CLiQ interface (4)
DRIVE-CLiQ interface (5)
Ethernet interface IE1/OP
Ethernet interface IE2/NET
Digital inputs/outputs
Power supply connector
PROFIBUS DP1 interface
PROFIBUS DP2/MPI interface
Measuring sockets (T0, T1, T2, and M)
SIMOTION CF plug-in
Fan/battery module interface
Non-usable interfaces
Table 3-2
Interface name
1st USB interface
2nd USB interface
RS232 interface
3rd Ethernet interface
D4x5
Manual, 03/2007 Edition
Overview of available external interfaces
Overview of interfaces that cannot be used for SIMOTION D
Name
X100
X101
X102
X103
X104 (D445 only)
X105 (D445 only)
X120
X130
X122, X132
X124
X126
X136
X131 - X134
X109
X190
Interface
X125
X135
X140
X127
Connector type
DRIVE-CLiQ plug
DRIVE-CLiQ plug
DRIVE-CLiQ plug
DRIVE-CLiQ plug
DRIVE-CLiQ plug
DRIVE-CLiQ plug
RJ45 socket
RJ45 socket
Micro Combicon 2x12-pin
Combicon 4-pin
9-pin SUB-D socket
9-pin SUB-D socket
Sockets on the circuit board
SIMOTION CF
Fan/battery module
Connector type
USB socket
USB socket
9-pin SUB-D pins
RJ45 socket
3
33