Rf380R - Siemens SIMATIC Ident System Manual

Transponder
MDS D526
MDS D528
Mounting the transponder on or in metal is only possible with the appropriate spacer or if there is
1)
adequate clearance to the metal.
Values of > 100 % can occur if transponders were developed specifically for mounting in/on metal-
2)
lic surroundings.
Reader RF350R with ANT 30 and with ISO transponders (MDS E)
Table 4- 51
Transponder
MDS E624
Mounting the transponder on or in metal is only possible with the appropriate spacer or if there is
1)
adequate clearance to the metal.
4.3.4.4

RF380R

With RF300 transponders
Table 4- 52
Transponder
RF320T
SIMATIC RF300
System Manual, 07/2016, C79000-G8976-C345-0x
without metal
1)
on metal; distance 25 mm
flush-mounted in metal;
distance all round 50 mm
without metal
on metal, distance 0 mm
Reduction of field data due to metal, range as %: Transponder and RF350R with ANT 30
without metal
1)
on metal; distance 15 mm
flush-mounted in metal;
distance all round 15 mm
Reduction of field data due to metal, range as %: Transponder and RF380R
Without metal
1)
On metal; distance 20 mm
Flush-mounted in metal;
distance all round 20 mm
Planning the RF300 system
4.3 Installation guidelines
ANT 30 without metal
??
??
??
??
??
ANT 30 without metal
100
85
80
Reader RF380R (RF300 mode)
Without metal On metal
100 95
85 75
60 55
ANT 30 mounted in met-
al
(20 mm all-round)
??
??
??
??
??
ANT 30 mounted in met-
al
(20 mm all-round)
85
75
45
Flush-mounted
in metal
(20 mm all-
round)
90
70
50
85