Setting The Calendar; Setting Proportional Pitch; Specifying The Protocol Code Format - SATO S8400 Operator's Manual

Table of Contents

3.8.16 Setting the Calendar

This menu lets you set the desired data and time if necessary.

Press the

buttons to select YES or NO.

Select NO to skip to the Zero Slash setting screen. Select YES to

set the date and time using the Press the

Thereafter, the next screen lets you ENABLE or DISABLE the

Calendar Check function. Choose the appropriate option and press

the ENTER button leave the Calendar settings and proceed to the

next screen.

This setting determines whether the space surrounding each text

character is of a fixed width, or whether that space is to be varied to

be visually more pleasant.

Use the

buttons to select either PROPORTIONAL or FIXED.

The default value is PROPORTIONAL.

Press ENTER to confirm your selection and return to the main User

Mode screen. Press the FUNCTION or CANCEL key to exit the User Mode setting.

Note:

The subject fonts are from x21 to x24

The ESC sequence can be defined as standard (using non-

printable code 1BH) or non-standard (some other user code).

Press the

buttons to select the STANDARD or NON-

STANDARD option. The default setting is STANDARD.

Press the ENTER button to confirm the setting and proceed to the

next screen.

S8400 Series Operator's Manual

Section 3: Configuration and Operation

buttons.

Page 3-19

Table of Contents