Page 1
Table of contents 2006-11-28 Instructions for use GL408e / GL412e Barcode printer Dok-ID: 01867 Read the operating instructions before starting work!
GL408e / GL412e Barcode printer Table of contents General..................4 Information on this quick guide ........4 Limitation of liability............4 Copyright................5 Customer Service ............5 Explanation of symbols..........6 Safety ..................7 Intended use ..............7 Incorrect use ..............8 Special dangers .............8 Transport and storage............9 Transport information.............9 Storage ................9...
GL408e / GL412e Barcode printer General 1 General 1.1 Information on this quick guide This quick guide provides important information on how to handle the device. Make sure to read this quick guide before using this printer! It is an integral part of the product and must be kept in the immediate vicinity of the device to be available to the operating staff.
GL408e / GL412e Barcode printer General 1.3 Copyright Treat the operating instructions confidentially. They are only intended for persons working with or on the device. Passing these operating instructions on to third parties without the written consent of the manufacturer is not permitted.
GL408e / GL412e Barcode printer General 1.5 Explanation of symbols Warnings In these operating instructions warnings are identified by symbols. These notes are introduced by signal words, which express the severity of a danger. Adhere to these notes and act cautiously in order to avoid accidents, personal injuries and damage to property.
GL408e / GL412e Barcode printer Safety 2 Safety This paragraph provides you with an overview of all important safety aspects for optimal protection of personnel as well as safe and trouble-free operation. Disregarding the operating instructions and safety regulations specified in this manual may result in considerable danger.
GL408e / GL412e Barcode printer Safety 2.2 Incorrect use The applications listed here may lead to errors, the destruction of the device or injury. Using printing materials other than the specified materials (e.g. inappropriate paper, clothing, cardboard). Inserting foreign objects into the printer.
GL408e / GL412e Barcode printer Transport and storage Electric current DANGER! Danger to life caused by electric current! Touching conductive parts causes a direct danger to life. Damage to insulations or individual components can cause danger to life. Therefore: – In case of damage to insulation switch off the power supply immediately and have the defective parts repaired.
GL408e / GL412e Barcode printer Installation 5 Installation Place the printer in a level place If installed in a rough or slanting place, quality printing will not be available. It may cause malfunction and shorten the life of the printer.
GL408e / GL412e Barcode printer Overview 6 Overview 6.1 Parts and functions Power switch (ON / OFF) Operation panel (display, buttons, LED) Front cover Media cover Fig. 1 Printer main body, front Print head (consumable) Platen roller (consumable) Fig. 2 Print head...
Page 13
GL408e / GL412e Barcode printer Overview Fig. 3 Printer main body, side Memory cartridge slot Stopper screw Roll guide Front cover Roll paper feeder Print head open/close latch Media guide knob 10 Ribbon feed spindle Label damper 11 Ribbon take-up spindle...