SATO S8400 Operator's Manual page 9

1.1 GENERAL SPECIFICATIONS
Specification
Electrical Characteristics
Print method
Head density
Printable Area
Print speed (Max)
CPU
Onboard Memory
Memory cartridge
Print Characteristics
Print/Dispensing Modes
Print Formats
Paper Thickness
Paper Size
*in continuous mode
Paper Supply Method
Pitch (paper) Sensor
Carbon ribbon
Dimensions
Thickness of base material
Color
Winding direction
Type Wax
Wax/Resin
Resin
Type Paper
(0.05 mm to
0.31 mm)
Film
S8400 Series Operator's Manual
Model S8408
8 dots/ mm (203 dpi)
W104 mm x pitch 2500 mm
4 to 16 inches/sec @203dpi
Note:
Maximum speed may be further dependent on the type of print layout, paper,
or carbon ribbon in use.
4 MB FLASH ROM, 16 MB SDRAM main memory (2.95 MB allocated for Receive Buffer),
32 KB FRAM, 8 KB SRAM for built-in calendar
Built-in CF card reader for optional factory-installed CF card
Continuous, Dispenser, Linerless (when selecting linerless media)
0.05 mm to 0.31 mm supported
Note: Be sure to use only printer supplies manufactured or certified by SATO.
Width: 22 mm to 128 mm (25 mm to 131 mm including liner)
Pitch: 6 mm to 356 mm (9 mm to 359 mm including liner)
Reflective type (I-mark) and Transmissive type (Gap)
Optional I-mark sensor for detecting I-marks located on the top (printable) side of labels
(Be sure to use the specified carbon ribbons manufactured or specified by SATO)
W25mm to 128m by up to 1000 m/roll (max outer diameter should be within 108 mm)
4.5 µm
Black (standard) with other colors available as optional consumables
Face-In and Face-out winding (see table below)
Labels and Ribbons available for the S8400 series
T102C, T101A, T104C
T110A, T112D, T123A, T122B, T123B
T222A, R335A, R236A, R333A
Fasson: Vellum extra, MC Primecoat, Premium TT1C
Raflatac: TOP E, ECO, Mactac KL370 (thermal), Raflagloss
Fasson: 2mil Gloss White, PE transparent
Raflatac: PE Gloss White
Model S8412
Thermal transfer and direct thermal
12 dots/ mm (305 dpi)
W104 mm x pitch 1500 mm
Not printable for 3 mm from the inner edge
4 to 14 inches/sec @305dpi
32-bit RISC
Transmitted from host (computer)
Via external unwinder
Ribbons
Labels
Section 1: Introduction
Model S8424
24 dots/ mm (609 dpi)
W104 mm x pitch 400 mm
2 to 6 inches/sec @609dpi
Page 1-3