Saving The Print Log; Clearing The Print Log; Setting The Print Log To Output At The Subport - SATO S8400 Operator's Manual

3.11.20 Saving the Print Log

This menu appears lets you ENABLE or DISABLE the print log
feature. This feature saves a log of print jobs to the optional
CompactFlash card installed in the printer. Turn it OFF if you do not
wish to have the print log saved to the CF Card. The default setting
is DISABLE.
Press the buttons to choose ENABLE or DISABLE.
Press the ENTER button to confirm the setting and proceed to the next screen.

3.11.21 Clearing the Print Log

This menu appears lets you clear any print log saved to the CF
Card. The default setting is NO.
Press the buttons to choose YES or NO.
Press the ENTER button to confirm the setting and proceed to the
next screen.

3.11.22 Setting the Print Log to Output at the Subport

With this option, you can output the print log to the printer's
Subport. The Subport refers to the topmost card slot at the rear of
the printer. Installing an interface card in this slot provides a
Subport. The default setting is DISABLE.
Press the buttons to choose YES or NO.
Press the ENTER button to confirm the setting and proceed to the next screen.
Note:
By default the mini-slot I/F card is set to be a subport for status monitoring purposes only. The
main I/F card is by default the data port for printing purposes. However, you can exchange the
roles of the two slots using the Data Port Assignment setting. See "3.6.3 Data Port Assignment"
on page 3-11.
S8400 Series Operator's Manual
Section 3: Configuration and Operation
Page 3-31