Setting Print Darkness; Setting Pitch Offset - SATO S8400 Operator's Manual

Table of Contents

Section 3: Configuration and Operation

3.5.3 Setting Print Darkness

After setting Print Speed, the next screen allows you to set the Print

Darkness—the darkness of the print on paper.

This setting can be set from 1 (lightest) to 5 (darkest). The default

setting is 3.

Press the

buttons to change the setting. Press the ENTER

button to confirm a setting and proceed to the next screen.

After setting Print Darkness, the next screen allows you to set the

Pitch Offset in millimeters.

This setting can be set from -49 mm to +49 mm. The default setting

is 00.

Use the

and the

buttons to set the value in mm.

ENTER button to confirm a setting and proceed to the next screen.

After the Pitch Offset menu, pressing ENTER returns you to the main menu containing the USER

mode icon and icons of other modes. Use the cursor buttons to select other modes if you wish to

change settings within those modes. Otherwise, press the CANCEL button to return to the

Normal mode.

S8400 Series Operator's Manual

Page 3-9

Table of Contents