User Mode; Entering User Mode - SATO S8400 Operator's Manual

3.5 USER MODE

The following settings are available in User Mode:
• PRINT SPEED (print speed setting)
• PRINT DARKNESS (print density setting)
• PRINT OFFSET (print position correction setting)
• ZERO SLASH (zero slash changeover setting)
• CHARACTER PITCH (proportional pitch setting)

3.5.1 Entering User Mode

1. Press the LINE button to take the printer OFFLINE.
2. Press ENTER. The ONLINE MODE screen appears.
3. Press the
MODE", then press ENTER.
Note:
The bottom right-hand corner of the screen sometimes displays
one to four arrow symbols (see circled symbols on the right).
Each arrow symbol represents the corresponding arrow button
on the operation panel which is valid for the changing the current
screen or its settings.
4. When the first User Mode: OFFSET VOLUME menu screen
appears, use a Cross Head (Phillips) screwdriver to adjust the
PITCH, OFFSET and DARKNESS potentiometers. See Section
3.5.2 Setting Print Speed.
5. Subsequently, pressing the ENTER button brings you to screens
for setting PRINT SPEED, PRINT DARKNESS and OFFSET. At
any time, pressing CANCEL takes you back one screen.
Pressing the FUNCTION button returns you immediately to the
main User Mode screen.
S8400 Series Operator's Manual
arrow buttons until you see "USER
Section 3: Configuration and Operation
Page 3-7