Specifying Sembl Auto Start; Setting The Ribbon Saver Feature - SATO S8400 Operator's Manual

Table of Contents

Section 3: Configuration and Operation

3.8.19 Specifying SEMBL AUTO START

Note:

SEMBL requires the optional CF Card to be installed. SEMBL

programs are stored on the CF Card.

This setting determines if the printer enters SEMBL mode

automatically on being turned ON. The available options are YES

and NO.

Press the

buttons to select YES or NO. The default setting is

NO. Selecting NO takes you to the RIBBON SAVER option below.

If YES is selected, you will see the next screen, which lets you

choose from the BASIC programs found in the printer's memory. Use the cursor buttons to select

from the list of available programs. Press the ENTER button to confirm the setting and proceed to

the next screen.

This setting enables or disables the Ribbon Saver feature. This

feature detects blank parts of a label while printing, and stops the

ribbon from winding until there is data to be printed.

Press the

buttons to select ENABLE or DISABLE. The

default setting is ENABLE.

Press the ENTER button to confirm the setting and return to the

ONLINE mode icon menu.

Page 3-20

S8400 Series Operator's Manual

Table of Contents