Control Board For 1 Or 2 Axes - Siemens SIMODRIVE 611 digital Configuration Manual

Aotewell Ltd
05.01 11.05
5.2.1
Control boards for
2 axes
© Siemens AG 2008 All Rights Reserved
SIMODRIVE 611 Configuration Manual (PJU) – 05/2008 Edition
HongKong|UK|China
www.aotewell.com

Control board for 1 or 2 axes

The following 2–axis control boards are available:


Mounting slot for
S
Optional TERMINAL module
or
S
Optional PROFIBUS DP module

S
Interfaces
S
Terminals
S
Switches

Memory module
S
Firmware
S
User data

Display and operator unit

Pulse interface

Equipment bus
The following applies to retaining screws:
Tighten (to establish a good shield contact)
max. torque = 0.8 Nm
For plug connections:
Plug connectors with the same number of pins must be
appropriately coded so that they cannot be interchanged (refer to
the index entry "Coding the mini connectors").
Fig. 5-4 Control boards for 2 axes (SIMODRIVE 611 universal HRS)
sales@aotewell.com
5.2 "SIMODRIVE 611 universal HRS" control board
2–axis for encoders with sin/cos 1Vpp or
2–axis for resolvers
(refer to Table 5-7)





Industry Automation
5 Control Units
X302


5-113
+86-755-8660-6182
5